Skip to main content

transfer experiments

.

I bought some HammerMill Color Copy Gloss paper this weekend at Office Depot. I had never seen it before and I keep trying to find a paper that gives me a really nice, consistent transfer without a whole lot of effort. (besides that I'm just a paper junkie.) Anyway here's a couple of samples of what happened. (remember this is just an experiment, I'm not going for art yet.)

In the first photo (above) the images are transferred to MDF that has a light coating of dried white gesso. I applied a layer of Golden Polymer Medium (gloss) and then burnished the images face down with a brayer -- the back of the paper covered with plastic to prevent gel medium from going everywhere. The daisy on the right was printed on a color laser printer and the one on the left was printed on an epson c88+ with durabrite ultra inks. This next one (below) is transferred to some untreated matboard -- again the laser on the right and the inkjet on the left.

Of course, the laser print is the more vivid of the two on both and I did have to be careful not to rub too hard on the inkjet one because it wanted to lift off a bit once I was down to the image. I only let it dry about 30 to 45 min. before I removed the paper. Whatever this paper is coated with makes it really easy to roll the paper off the image/gel layer. It rolls right off leaving kind of a chalky white film with just a tiny bit of paper fibers still attached. Doesn't take much after that to get the remaining paper and white stuff off. I used a wet paper towel to completely remove the white chalky stuff when all the paper had been removed. Not sure why the gaping hole in the daisy on the right -- probably didn't get gel medium spread evenly or I may have been too energetic in removing the paper.

I think I love experimentation more than the art. It's nice not having any expectations or being afraid I'll ruin something I'm working on.

Comments

Diane said…
These turned out wonderful! So vivid. I, also love the experimentation as much & sometimes more than making an actual piece of art. You described that quite nicely as I could relate immediately. Very nice work!
Laurie said…
Thanks Diane! I've been to your blog and enjoyed seeing your wonderful art. Lots of great transfers!

Loved your playlist as well. :)
marianne said…
thanks for visiting my blog. also thanks for posting the experiments- helps to see what others have figured out- and i noticed paper on sale at o.d. yesterday- may have to go back :)

enjoyed looking at the rest of your art- hapyy playing!
Mary Lynn said…
Thank you for the information. These flowers are beautiful.I had no idea that a lazer printer made that big of a difference in the print quality. What type do you have? Before you used the brayer, did you just cover the back with plastic to keep the brayer clean, or is it for something else, and did you leave it in place after you used the brayer?
LTG said…
Hi Mary Lynn -- thanks so much for visiting my blog! (I sent an email response to you but just in case it didn't get to you, I'm repeating myself.)

I have a Konica Minolta Magicolor 2530DL. I got it at Sam's Club almost two years ago and it's been great. It was probably around $200+ at that time.

I just covered the back with plastic so any gel that might squish out would squish onto the plastic and not onto the brayer, so yes, mostly to keep the brayer clean but also to keep the gel medium off the back of the image. After burnishing or rolling it, I took off the plastic. You could just use parchment or wax paper instead but plastic shopping bags are free. :) (be careful if the bags have printing on them though because that ink will transfer too.)

Popular posts from this blog

nothing new

. Ok. So I'm blogging. I still say who cares? I really wonder. I also wonder what I have to say that hasn't already been said. Somewhere. By someone else. Before I even thought to say it. There's nothing new under the sun as someone before me has so wisely said. For instance take the above example. I had tumbled the antique purple Glass Graveyard find (aka dump glass) in my brand new rock tumbler overnight with water and sand to simulate a frosted sea glass look. Today I (being afraid even of miniature power tools) took my brand new $10 off, cordless, bargain Dremel tool and actually, successfully drilled a hole in the glass. (First try!) Jump rings were then inserted successfully into the hole by this non-jewelry maker. I printed the image of the flowers on the glass by a printmaking technique called polyester plate lithography and then embossed the image in silver, inserted the ribbon and ta-dah . . . a necklace. I thought maybe no one else had ever thought to d...

Leona Mae Killoy. 3-25-1914 to 4-29-2009

. I feel so sad and relieved all at the same time but Gramma passed away this week on Wednesday. I didn't know it was possible to feel both emotions to this extent, all at the same time. What a fighter she was. CHF, diabetes, heart valve issues etc., and 95 years of age but man, such a fierce little thing. She actually had a fever of over 108 degrees before she finally gave it up the other day...it was crazy. Her nurse said he had never seen anything like it. She was always so fussy about her appearance and grooming she would've hated the way her hair looked that day. She was also very, very picky about her personal comfort. We were always fluffing pillows and changing her sleeping (beds, bedding, etc.) and resting (chairs, couches, recliners, etc.) accoutrements because it seemed her opinions about such things changed weekly. Her food preferences changed frequently also and she preferred a varied menu up until the last week or so. Except for a few standbys. If nothing else sou...

the grand duke of hop canyon

. Two o’clock this morning I was awake and afraid to go out of my bedroom because of not knowing whether my dog, Duke, would still be breathing or not. Jimmy was sleeping on the couch in the living room to be near him, just in case. He’s been in and out of the dog hospital the past couple weeks while they tried to figure out what was going on with him and they decided on Monday that a cancerous tumor on his spleen was causing his declining health. Actually, he was in pretty serious condition when he went back to the vet’s office this past Saturday. I’ve been grieving since then and I guess I’m weary of the pain. The pain of grief is odd – it seems to rise to the surface and be multiplied by each loss that is experienced. I think partly because it is simply a reminder of other losses but also each loss has some regrets associated with it and each loss permanently removes a blessing and a joy of some kind from our lives that we must learn to do without. And then once you’ve experienced...